Soundproofing Ceilings

(materials from www.noisestopsystems.co.uk)

 

 

NSSC2 Ceiling Option 1+ Description

18 mm Soundproofing wall board with two layer laminated panel of acoustic mineral board / high density, impregnated, sound reductive rubber membrane. Full tech spec & attenuation below (traditionally approx. 100 mm)

The resultant panel, when applied using the NoiseStop System Soundproofing method, is equivalent to an traditional acoustic infill of 100 mm thickness. The NoiseStop System method statement must be adhered to in its entirety to achieve the best sound proofing results

The panels should be skimmed and then brought to required decorative.

Installation

We recommend this method of sound insulation for airborne noise, but it can also be use for impact noise solution.

1. Take off current plaster board to expose the joist. You will need access to your original joist to carry out the work.
2. Place Dense Fibre Matting (DMF 100mm 100kg) into the void between joists. Cut to fit, making sure that there are no gaps.
3. Build another layer of joist going horizontally to the original joist, with 2x2 timbers.
4. Place Dense Fibre Matting (DMF 50mm 100kg) into the void between joists. Cut to fit, making sure that there are no gaps.
5. Attach sound breaker bars horizontally across new joist, by screwing it into the joist. The Sound Breaker Bars has pre drill holes.
6. Screw NSSC1+ to the Sound Breaker Bars.
7. Skim plaster to finish. Decorate to your requirement after.
8. You will loose a total of 100mm to 150 mm of ceiling height.

NSSC2 Ceiling Option 2+ Description

28 mm Soundproofing wall board with two layer laminated panel of acoustic mineral board / high density, impregnated, sound reductive rubber membrane. Full tech spec & attenuation below (traditionally approx. 100 mm)

The resultant panel, when applied using the NoiseStop System Soundproofing method, is equivalent to an traditional acoustic infill of 100 mm thickness. The NoiseStop System method statement must be adhered to in its entirety to achieve the best sound proofing results

The panels should be skimmed and then brought to required decorative.

 

 

DFM 100 (100kg/m3)
DFM products are manufactured to a higher density than other mineral wool slabs and provide improved Soundproofing acoustic control across a wide range of frequencies. Effective sound proofing insulation is an essential requirement for modern life styles. Excessive noise maybe from noisy neighbours can increase stress, hinder speech and can cause its own form of environmental pollution.

DFM has been proven over many years to be the ideal Soundproofing insulation material for all applications where noise attenuation or noise absorption is needed - in Soundproofing in the home / domestic, commercial, manufacturing, industrial and environmental situations. In addition to its acoustic properties, its well known thermal insulation and fire protection performance are inherent benefits. Thickness' of 25, 50, 75, 100 and 200mm are available. Prices vary accordingly. The most commonly used is the 50mm when applied inside 2"x2" stud work in wall partition constructions.

DFM 50 (140kg/m3)
DFM products are manufactured to a higher density than other mineral wool slabs and provide improved Soundproofing acoustic control across a wide range of frequencies. Effective sound proofing insulation is an essential requirement for modern life styles. Excessive noise maybe from noisy neighbours can increase stress, hinder speech and can cause its own form of environmental pollution.

DFM has been proven over many years to be the ideal Soundproofing insulation material for all applications where noise attenuation or noise absorption is needed - in Soundproofing in the home / domestic, commercial, manufacturing, industrial and environmental situations. In addition to its acoustic properties, its well known thermal insulation and fire protection performance are inherent benefits. Thickness' of 25, 50, 75, 100 and 200mm are available. Prices vary accordingly. The most commonly used is the 50mm when applied inside 2"x2" stud work in wall partition constructions.

 

SoundBreaker Bars
Can help to reduce transmission of sound between floors and ceilings when using traditional plasterboard ceilings. Also helpful when needing to separate NoiseStop Soundproofing panels from wall structures. The bars are available in 3m lengths, 70mm wide by 15mm deep.

 

NOISESTOP SYSTEMS - NSSC2 Acoustic Board

Rw	Rw+Ctr
37dB	34dB

 

Specification

NSSC1

• Thickness:      15mm  (+1mm)
• Size:               1200mm x 1200mm [other sizes on request]
• Weight:           18.5kg
• Finish:             Paper finish ready for plaster skim

NSSC1+

• Thickness:      17.5mm  (+1mm)
• Size:               1200mm x 1200mm [other sizes on request]
• Weight:           kg
• Finish:             Paper finish ready for plaster skim

NSSC2

• Thickness:      27.5mm  (+1mm)
• Size:               1200mm x 1200mm [other sizes on request]
• Weight:           kg
• Finish:             Paper finish ready for plaster skim